JULUN (H.K)CO.,LTD (DONGGUAN JULUN ELECTRONICS CO.,LTD)
JUUN(H.K)JULUN CO.,LTD DongGuan JULUN ELECTRONICS CO.,LTD Main business: the circuit protection device, current fuse, temperature fuse series, fuse holder series, automatic recovery fuse, fuse
Add to Cart
Polymer Material PTC Resettable Fuses 60V DC CSA Safety Standards
Radial Leaded Devices
Cured, flame retardant epoxy polymer insulating material meets UL94V-0 requirements
Bulk packaging , or tape and reel available on most models
Almost anywhere there is a low voltage power supply, up to DC60V and a load to be protested, including:
Automotive electronics
Medical products
Industrial controls
| P/N | Ihold | Itrip | Vmax (Vdc) | Imax (A) | Maximum Time To Trip(12V) | Resistance | |||
| Current (A) | Time (sec.) | Rmin (Ω) | Rmax (Ω) | R1max (Ω) | |||||
| BJK60-005 | 50mA | 100mA | 60 | 40 | 0.25 | 5 | 7.3 | 20 | 30 |
| BJK60-010 | 100mA | 200mA | 60 | 40 | 0.5 | 5 | 2.5 | 7.5 | 12 |
| BJK60-017 | 170mA | 340mA | 60 | 40 | 0.85 | 5 | 2 | 5.21 | 8 |
| BJK60-020 | 200mA | 400mA | 60 | 40 | 1 | 5 | 1.5 | 2.84 | 4.49 |
| BJK60-025 | 250mA | 500mA | 60 | 40 | 1.25 | 5 | 1 | 1.95 | 3 |
| BJK60-030 | 300mA | 600mA | 60 | 40 | 1.5 | 5 | 0.76 | 1.38 | 2.2 |
| BJK60-040 | 400mA | 800mA | 60 | 40 | 2 | 5 | 0.45 | 0.88 | 1.4 |
| BJK60-050 | 500mA | 1.0A | 60 | 40 | 2.5 | 5 | 0.4 | 0.79 | 1.2 |
| BJK60-065 | 650mA | 1.3A | 60 | 40 | 3.25 | 5 | 0.31 | 0.5 | 0.74 |
| BJK60-075 | 750mA | 1.5A | 60 | 40 | 3.75 | 5 | 0.25 | 0.42 | 0.62 |
| BJK60-090 | 900mA | 1.8A | 60 | 40 | 4.5 | 5 | 0.2 | 0.33 | 0.49 |
| BJK60-110 | 1.10A | 2.2A | 60 | 40 | 5.5 | 8 | 0.15 | 0.27 | 0.4 |
| BJK60-135 | 1.35A | 2.7A | 60 | 40 | 6.75 | 8 | 0.12 | 0.21 | 0.32 |
| BJK60-160 | 1.60A | 3.2A | 60 | 40 | 8 | 8 | 0.09 | 0.16 | 0.24 |
| BJK60-185 | 1.85A | 3.7A | 60 | 40 | 9.25 | 8 | 0.08 | 0.14 | 0.21 |
| BJK60-200 | 2.00A | 4.0A | 60 | 40 | 10 | 8 | 0.07 | 0.14 | 0.21 |
| BJK60-250 | 2.50A | 5.0A | 60 | 40 | 12.5 | 8 | 0.05 | 0.1 | 0.15 |
| BJK60-300 | 3.00A | 6.0A | 60 | 40 | 15 | 8 | 0.04 | 0.08 | 0.12 |
| BJK60-375 | 3.75A | 7.5A | 60 | 40 | 18.75 | 24 | 0.03 | 0.06 | 0.1 |
| BJK60-500 | 5.00A | 10.0A | 60 | 40 | 25 | 24 | 0.02 | 0.06 | 0.1 |
Ihold :Maximum current device will sustain for 1 hour without tripping in 25℃ still air.
Itrip :Minimum current at which the device will trip in 25℃ still air.
Vmax :Maximum operating voltage device can withstand without damage at rated current(Imax).
Imax : Maximum fault current device can withstand without damage at rated voltage(Vmax).
Rmin/Rmax: Minimum/Maximum resistance of device in initial (un-soldered) state.
R1max:Maximum resistance of device at 25℃ measured one hour after tripped tripping.
*CAUTION:Operation beyond the specified rating may result in damage and possible arcing.
The devices are intended for protection against occasional overcunent or overtemperature fault and should not be
used when repeated fault conditions are anticipated.
| Model | Fig. | Quantity | A(max) | B(max) | C(max) | D(type) |
| BJK60-005 | 1 | 1000 | 5 | 8.5 | 3 | 5.1 |
| BJK60-010 | 1 | 1000 | 5.5 | 9.5 | 3 | 5.1 |
| BJK60-017 | 1 | 1000 | 7.4 | 12.7 | 3 | 5.1 |
| BJK60-020 | 1 | 1000 | 7.4 | 12.7 | 3 | 5.1 |
| BJK60-025 | 1 | 1000 | 7.4 | 12.7 | 3 | 5.1 |
| BJK60-030 | 1 | 1000 | 7.4 | 13 | 3 | 5.1 |
| BJK60-040 | 1 | 1000 | 7.8 | 16.2 | 3 | 5.1 |
| BJK60-050 | 1 | 1000 | 7.8 | 16.2 | 3 | 5.1 |
| BJK60-065 | 1 | 1000 | 9.7 | 17.8 | 3 | 5.1 |
| BJK60-075 | 1 | 1000 | 10.4 | 18.4 | 3 | 5.1 |
| BJK60-090 | 1 | 1000 | 11.7 | 18.4 | 3 | 5.1 |
| BJK60-110 | 2 | 1000 | 13 | 18 | 3 | 5.1 |
| BJK60-135 | 2 | 500 | 14.5 | 19.6 | 3 | 5.1 |
| BJK60-160 | 2 | 500 | 16.3 | 21.3 | 3 | 5.1 |
| BJK60-185 | 2 | 500 | 17.8 | 22.9 | 3 | 5.1 |
| BJK60-200 | 2 | 200 | 17.8 | 22.9 | 3 | 5.1 |
| BJK60-250 | 2 | 200 | 21.3 | 26.4 | 3 | 10.2 |
| BJK60-300 | 2 | 200 | 21.3 | 26.4 | 3 | 10.2 |
| BJK60-375 | 2 | 200 | 28.5 | 33.5 | 3 | 10.2 |
| BJK60-500 | 2 | 200 | 28.5 | 33.5 | 3 | 10.2 |
Note: (1) The packing information is a bag of quantity(unit: pcs).
(2) The dimensions unit is mm.
Q: Are you trading company or manufacturer ?
A: We are a fuse and fuse holder factory.
Q: How long is your delivery time?
A: Generally it is 3 days if the goods are in stock. Or it is 5-10 days if the goods are not in stock, according to the quantity.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q: What is your terms of payment ?
A: 100% in advance, T/T.
Please tell me:
What product specifications do you need? when you ask for a quotation.I will give you the most competitive price per as your requirements. And we have many types for you to choose.
P.S.:If you can't find any products to meet your requirements. welcome to send us the details drawings so that we can provide us our professional & best service to you.